Installation Guide
Tools Needed:
- Adjustable wrench set
- Socket set (3/8" drive)
- Screwdrivers (flat and Phillips)
- Pliers
- Torque wrench
- Jack stands
Step-by-Step Assembly
- Unpack and Inspect: Carefully remove all packaging materials and inspect for shipping damage. Verify all parts are included.
- Install Steering Wheel: Align steering wheel with shaft and secure with provided hardware. Torque to 25-30 ft-lbs.
- Attach Seat: Position seat on mounting brackets and secure with bolts and washers. Ensure seat moves freely on adjustment lever.
- Install Battery: Connect red cable to positive terminal, black cable to negative terminal. Apply anti-corrosion grease to terminals.
- Attach Mower Deck: Lower deck lift lever, align deck with mounting points, and secure with pins and retaining clips.
- Connect Drive Belt: Route belt according to diagram in manual, ensuring proper alignment on pulleys.
- Add Fluids: Fill engine with SAE 10W-30 oil (48 oz). Add fresh unleaded gasoline (minimum 87 octane).
- Initial Start-up: Perform pre-operation check, start engine, and test all functions including mower engagement.
Specifications
| Model Series | YTH24V48 |
| Type | Riding Lawn Tractor |
| Color | Orange/Black |
| Cutting Width | 48 inches |
| Engine Type | Briggs & Stratton Endurance Series |
| Engine Power | 24 HP (724cc) |
| Transmission | Hydrostatic, Foot-Operated |
| Fuel Capacity | 3.0 gallons |
| Cutting Height Range | 1.5 - 4.0 inches (12 positions) |
| Turning Radius | 18 inches |
| Dimensions (LxWxH) | 72 x 54 x 42 inches |
| Weight | 520 lbs |
| Max Speed | 5.5 mph forward, 2.5 mph reverse |
Warranty Information
- Full Warranty: 2 years limited warranty
- Engine Warranty: 3 years on Briggs & Stratton engine
- Transmission Warranty: Lifetime on hydrostatic transmission
- Additional Coverage: Extended protection plans available
For warranty service, contact Husqvarna Customer Service at 1-800-487-5962 or visit Husqvarna.com
Key Features
Hydrostatic Transmission
Smooth, foot-operated hydrostatic transmission provides infinite speed control without shifting gears, offering superior maneuverability and ease of operation.
Air Induction Mowing Technology
Patented deck design pulls grass upright before cutting for a cleaner, more even cut. Reduces clumping and improves bagging performance.
Cruise Control
Maintain consistent mowing speed on straightaways for professional-looking results. Easily engage/disengage with dashboard control.
Fabricated Mower Deck
7-gauge steel fabricated deck provides exceptional durability and resistance to rust. Reinforced design handles tough conditions.
Ergonomic Controls
All controls are within easy reach. Comfortable high-back seat with armrests and easy-adjust lever for operator comfort during long mowing sessions.
Electric PTO Engagement
Engage mower deck with the flip of a switch. No manual clutch lever required. Includes safety interlock system.
Cutting System Components
Triple Blade System
Three high-lift blades create powerful vacuum for superior grass discharge and bagging performance
Deck Wash Port
Connect garden hose to clean underside of deck without removing it, preventing grass buildup
Anti-Scalp Rollers
Front and rear rollers prevent deck from scalping lawn on uneven terrain
Quick-Change Height Adjustment
Single lever adjusts all three wheels simultaneously for fast cutting height changes
Dual Mulching Capability
Convert from side-discharge to mulching with optional kit for nutrient-rich lawn feeding
Heavy-Duty Spindles
Sealed bearing spindles with grease fittings for long life and easy maintenance
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | Dead battery, safety switch engaged, fuel issue | Check battery charge, ensure seat switch engaged, verify fuel flow |
| Poor cutting performance | Dull blades, incorrect cutting height, deck clogged | Sharpen/replace blades, adjust cutting height, clean deck underside |
| Excessive vibration | Unbalanced blade, loose components, damaged spindle | Balance or replace blade, tighten all bolts, inspect spindles |
| Hydrostatic transmission issues | Low fluid, air in system, linkage adjustment needed | Check fluid level, bleed system, adjust control linkage |
| Uneven cutting | Deck not level, tire pressure uneven, worn blades | Level mower deck, adjust tire pressure, replace blades |
| Loss of power | Clogged air filter, old fuel, carburetor issues | Replace air filter, use fresh fuel, clean carburetor |
Error Codes & Indicators
- Oil Light: Low oil pressure - Check oil level immediately
- Battery Light: Charging system failure - Check alternator and connections
- No Movement: Parking brake engaged or transmission issue - Disengage brake, check linkage
- PTO Won't Engage: Safety switch fault - Check seat and PTO switches
- Overheating: Engine temperature high - Clean cooling fins, check oil level
- Fuel Gauge Empty: Refuel immediately - Use fresh unleaded gasoline only
Manual Downloads
Current Model Manuals
YTH24V48
24HP 48" Lawn Tractor
YTH22V46
22HP 46" Lawn Tractor
YTH26V54
26HP 54" Lawn Tractor
YTH18542
18.5HP 42" Lawn Tractor
Popular Previous Models
YTH2348
23HP 48" Lawn Tractor
YTH20K46
20HP 46" Kohler Engine
LTH18538
18.5HP 38" Lawn Tractor
GT52XLS
26HP 52" Garden Tractor