Husqvarna LGT2654 Owner's Manual

The Husqvarna LGT2654 is a 26 HP Kohler V-Twin engine lawn and garden tractor with a 54-inch fabricated mower deck, hydrostatic transmission, power steering, electric PTO, and cruise control. Designed for residential use on medium to large properties. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Controls & Operation 4. Specifications 5. Maintenance Schedule 6. Mower Deck Operation 7. Storage & Winterization 8. Safety Information 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: 26 HP Kohler V-Twin engine, 54-inch fabricated mower deck, Hydrostatic transmission, Power steering, Electric PTO, Cruise control, Comfortable high-back seat.

FeatureDescription
Engine26 HP Kohler V-Twin, air-cooled
Mower Deck54-inch fabricated, 3-blade
TransmissionHydrostatic, infinite forward/reverse speeds
SteeringPower-assisted
PTOElectric clutch engagement
Cruise ControlMaintains constant speed
SeatHigh-back, adjustable
Fuel Capacity3.5 gallons
Cutting HeightAdjustable 1.5 to 4.5 inches
HeadlightsIntegrated for low-light operation

Assembly & Setup

Unpack and inspect contents. Assembly required for steering wheel, seat, and mower deck.

  1. Attach steering wheel: Align and secure with provided hardware.
  2. Install seat: Mount on seat plate and secure with bolts.
  3. Attach mower deck: Lower deck under tractor, connect drive belt and linkage.
  4. Check tire pressure: Inflate to 12 PSI (front) and 10 PSI (rear).
  5. Add engine oil and fuel: Use SAE 10W-30 oil and unleaded gasoline.

WARNING! Tractor is heavy; use assistance during assembly. Ensure all bolts are tightened to specification.

Controls & Operation

Familiarize yourself with all controls before starting the engine.

  1. Ignition switch: Turn key to start engine.
  2. Throttle control: Set engine speed (slow to fast).
  3. Choke: Use for cold starts.
  4. Hydrostatic drive pedals: Forward and reverse speed control.
  5. PTO switch: Engage/disengage mower blades.
  6. Cutting height lever: Adjust mower deck height.
  7. Parking brake: Set before dismounting.

CAUTION! Keep hands and feet away from moving parts. Do not operate on slopes greater than 15 degrees.

Specifications

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

IntervalTask
Before each useCheck engine oil level, tire pressure, and for debris
Every 8 hoursCheck mower blades for sharpness and damage
Every 50 hoursChange engine oil and filter
Every 100 hoursReplace air filter, spark plugs
Every 200 hoursChange hydrostatic transmission fluid
SeasonallyGrease fittings, check belts for wear

Tip: Always refer to the engine manual for specific engine maintenance.

Mower Deck Operation

Proper mower deck operation ensures a clean cut and extends blade life.

  1. Engage PTO: Only when engine is at full throttle.
  2. Adjust cutting height: Set lever to desired height before mowing.
  3. Mowing pattern: Overlap each pass by 2-3 inches for even cut.
  4. Disengage PTO: Before stopping engine or crossing non-grass areas.
  5. Clean deck: After each use to prevent grass buildup.

WARNING! Always disengage PTO and wait for blades to stop before crossing driveways or gravel.

Storage & Winterization

Prepare tractor for long-term storage, especially over winter.

  1. Add fuel stabilizer: Run engine for 5 minutes to circulate.
  2. Change oil and filter: Prevents acid buildup.
  3. Remove battery: Store in a cool, dry place and charge monthly.
  4. Clean mower deck: Remove all grass and debris.
  5. Store indoors: In a dry, covered location if possible.

CAUTION! Never store tractor with fuel in tank without stabilizer. Fuel can degrade and damage engine.

Safety Information

Always follow safety guidelines to prevent injury or damage.

DANGER! Never attempt to clear clogged chute or blades with engine running. Disengage PTO and remove key.

Warranty Information

Husqvarna LGT2654 includes a 2-year limited warranty for residential use. Warranty covers defects in materials and workmanship. Not covered: normal wear, misuse, lack of maintenance, or commercial use. For warranty claims, contact an authorized Husqvarna dealer with proof of purchase.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startDead battery, empty fuel, clogged filterCharge/replace battery; add fuel; replace fuel filter.
Poor cutting performanceDull blades, low engine speedSharpen or replace blades; run at full throttle.
Excessive vibrationUnbalanced blade, loose partsBalance or replace blade; tighten bolts and fittings.
Loss of powerDirty air filter, old spark plugsClean or replace air filter; install new spark plugs.
Hydrostatic transmission issuesLow fluid, damaged drive beltCheck fluid level; inspect and replace belt if worn.

Service: For repairs beyond basic maintenance, contact an authorized Husqvarna service dealer.

Support: 1-800-HUSKY62; www.husqvarna.com

Husqvarna LGT2654 Owner's Manual © - All Rights Reserved 2025