Husqvarna Mowers Z248F Owners Manual

The Husqvarna Z248F is a 24 HP zero-turn riding mower featuring a Kohler 7000 Series engine, 48-inch fabricated mower deck, hydrostatic transmission with dual foot pedals, ergonomic high-back seat, easy-access service points, and a robust steel frame. Below are key sections for safety, features, operation, maintenance, troubleshooting, and specifications.

1. Features at a Glance 2. Safety Information 3. Assembly & Setup 4. Controls & Operation 5. Specifications 6. Mower Deck Operation 7. Maintenance Schedule 8. Engine Care 9. Storage & Winterization 10. Troubleshooting 11. Warranty & Support

Features at a Glance

Key components: 24 HP Kohler 7000 Series engine, 48-inch fabricated mower deck, Hydro-Gear EZT transmission, dual foot pedal controls, ergonomic seat, hour meter, cup holder, and easy-lift deck system.

Feature	Description
Engine	24 HP Kohler 7000 Series, OHV, air-cooled
Cutting Width	48 inches (122 cm)
Transmission	Hydro-Gear EZT hydrostatic, dual foot pedals
Deck Type	Fabricated steel, 3-blade, anti-scalp rollers
Speed Range	0-7 mph forward, 0-3 mph reverse
Fuel Capacity	3 gallons (11.4 liters)
Seat	High-back, adjustable, with armrests
Chassis	Heavy-duty steel frame
Blade Engagement	Electric PTO clutch
Drive System	Zero-turn, rear-wheel drive

Safety Information

Read all instructions before operation. Always wear appropriate safety gear.

Clear mowing area of debris, rocks, and toys before starting.
Never carry passengers; operator only.
Do not mow on slopes greater than 15 degrees.
Keep hands and feet away from moving parts, especially deck and blades.
Stop engine and remove key before performing maintenance.

WARNING! Gasoline is flammable; refuel outdoors with engine off and cool. Avoid carbon monoxide poisoning – never operate in enclosed spaces.

Assembly & Setup

Unpack and inspect contents. Assembly required for steering wheel, seat, and deck.

Attach steering wheel: Align and secure with provided hardware.
Install seat: Mount onto seat plate, adjust tension for operator weight.
Check tire pressure: Inflate to 14 PSI (front) and 10 PSI (rear).
Add engine oil: Use SAE 10W-30, fill to dipstick "Full" mark.
Add fuel: Use fresh unleaded gasoline (87 octane minimum).
Connect battery: Attach red (+) then black (-) terminals.

CAUTION! Use proper tools; ensure all bolts are tightened to specified torque.

Controls & Operation

Familiarize yourself with controls before starting engine.

Dashboard: Ignition key, PTO switch, hour meter, throttle, choke, parking brake lever.

Foot Pedals: Left pedal controls left wheel; right pedal controls right wheel. Push forward to go forward, pull back to reverse.

Starting Procedure:

Set parking brake.
Move throttle to fast position.
Turn key to START; release when engine starts.
Disengage parking brake.
Engage PTO switch to lower and start blades.

Stopping: Disengage PTO, move throttle to slow, turn key to OFF, set parking brake.

Specifications

Model: Z248F
Engine: Kohler 7000 Series, 24 HP, 725 cc
Cutting Width: 48 inches
Transmission: Hydro-Gear EZT hydrostatic
Fuel Type: Unleaded gasoline (87 octane minimum)
Oil Capacity: 2 quarts (1.9 liters)
Cutting Height Range: 1.5 to 4.5 inches (12 positions)
Weight: 580 lbs (263 kg)
Warranty: 3-year limited

Mower Deck Operation

The 48-inch fabricated deck provides even cutting with adjustable height.

Height adjustment: Use deck lift lever; set to desired height (1.5-4.5 inches).
Blade engagement: Engage PTO switch only at full throttle.
Cutting patterns: Overlap passes by 2-3 inches for even cut.
Deck wash port: Use after mowing to clean underside of deck.

Tip: Mow at slower speeds in tall or wet grass for best results.

Maintenance Schedule

Interval	Task
Before each use	Check tire pressure, fuel level, deck for debris
First 5 hours	Change engine oil (break-in)
Every 50 hours	Change engine oil and oil filter
Every 100 hours	Replace air filter; check spark plug
Every 200 hours	Change hydrostatic transmission fluid
Seasonally	Sharpen blades; grease fittings

Note: Refer to engine manual for specific engine maintenance.

Engine Care

Regular maintenance ensures long engine life.

Oil change: Use SAE 10W-30; drain when warm; replace filter.
Air filter: Clean foam pre-cleaner every 25 hours; replace paper element as needed.
Spark plug: Gap at 0.030 inches; replace annually.
Fuel filter: Replace if clogged or annually.

WARNING! Never run engine without air filter; avoid dirt ingestion.

Storage & Winterization

Prepare mower for storage if not used for 30+ days.

Add fuel stabilizer to tank; run engine for 5 minutes.
Change oil and filter.
Remove spark plug; add 1 tablespoon of oil to cylinder; pull starter cord slowly to coat.
Clean mower thoroughly, especially underside of deck.
Store in dry, covered area; disconnect battery.

CAUTION! Do not store with fuel in carburetor without stabilizer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel, clogged filter	Charge battery; add fuel; replace fuel filter.
Uneven cutting	Dull blades, uneven tire pressure	Sharpen blades; adjust tire pressure; level deck.
Loss of power	Dirty air filter, old spark plug	Clean/replace air filter; replace spark plug.
Vibration	Loose blade, damaged spindle	Tighten blade bolts; inspect spindle bearings.
Hydrostatic issues	Low fluid, drive belt worn	Check fluid level; inspect and replace belt if needed.

Reset: Check all safety switches (seat, parking brake, PTO).

Warranty & Support

Husqvarna Z248F includes a 3-year limited warranty for residential use. Warranty covers defects in materials/workmanship; does not cover normal wear, misuse, or lack of maintenance. For support, contact Husqvarna at 1-800-487-5962 or visit www.husqvarna.com. Keep proof of purchase for warranty claims.