Husqvarna Riding Mower Manual YTH22V46

The Husqvarna YTH22V46 is a 22 HP V-Twin riding lawn mower with a 46-inch cutting deck, hydrostatic transmission, electric blade engagement, and a comfortable high-back seat. Designed for residential lawn care, it features a durable steel frame, easy-access controls, and a large fuel tank. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Instructions 3. Assembly & Setup 4. Specifications 5. Controls and Operation 6. Cutting Deck Operation 7. Maintenance Schedule 8. Storage & Winterization 9. Troubleshooting 10. Warranty Information

Features at a Glance

Key components: 22 HP Briggs & Stratton V-Twin engine, 46-inch fabricated steel cutting deck, Hydrostatic transmission, Electric PTO (blade engagement), High-back seat, Headlights, Hour meter, Cup holder.

Feature	Description
Engine	22 HP Briggs & Stratton V-Twin, OHV
Cutting Width	46 inches
Transmission	Hydrostatic, single pedal control
Blade Engagement	Electric PTO switch
Cutting Height	Adjustable 1.5-4 inches (lever)
Fuel Capacity	3 gallons
Seat	High-back, adjustable
Headlights	For low-light operation
Hour Meter	Tracks service intervals
Deck Material	Fabricated steel

Safety Instructions

Read all instructions before operating. Wear appropriate safety gear.

Clear mowing area of debris, rocks, and toys.
Never carry passengers; only operator on seat.
Do not mow on slopes greater than 15 degrees.
Disengage blades before crossing driveways or gravel.
Keep hands and feet away from moving parts.

WARNING! Engine and muffler become hot; allow to cool before refueling or servicing. Always engage parking brake when stopped.

Assembly & Setup

Unpack and inspect contents. Assembly requires basic tools.

Install steering wheel: Align and tighten bolt.
Attach seat: Mount with provided bolts and washers.
Connect battery: Attach red (+) then black (-) cables.
Check tire pressure: Inflate to 14 PSI (front), 10 PSI (rear).
Add engine oil: Use SAE 30 (approx. 2 quarts).
Add fuel: Use fresh unleaded gasoline (87 octane minimum).

CAUTION! Use two people when lifting heavy components. Ensure all bolts are tightened securely.

Specifications

Model: YTH22V46
Engine: 22 HP Briggs & Stratton V-Twin, OHV
Cutting Deck: 46-inch, fabricated steel
Transmission: Hydrostatic, infinite speeds 0-5.5 mph
Fuel Type: Unleaded gasoline (87 octane minimum)
Fuel Capacity: 3 gallons
Oil Capacity: 2 quarts (SAE 30)
Cutting Height: 1.5 to 4 inches (6 positions)
Turning Radius: 18 inches
Weight: 540 lbs

Controls and Operation

Operator station: Ignition key, Throttle/Choke, PTO switch, Hydrostatic pedal, Parking brake, Cutting height lever.

Starting Procedure: 1. Sit on seat. 2. Engage parking brake. 3. Set throttle to FAST. 4. Turn key to START. 5. Disengage parking brake to move.

Stopping: 1. Disengage PTO (blades off). 2. Return hydrostatic pedal to neutral. 3. Engage parking brake. 4. Turn key to OFF.

Driving: Press forward on pedal to go forward, reverse to back up. Speed controlled by pedal pressure.

Cutting Deck Operation

Engage blades only when engine is at full throttle.

Adjust cutting height: Move lever to desired position (1-6).
Engage blades: Pull up PTO switch (electric).
Mow in overlapping passes for even cut.
Disengage blades when crossing non-grass areas.
Clean deck after each use to prevent buildup.

Tip: For best results, mow when grass is dry. Avoid mowing in reverse when possible.

Maintenance Schedule

Regular maintenance ensures long life and performance.

Interval	Task
Before each use	Check tire pressure, inspect for damage, check oil level
Every 8 hours	Clean cutting deck, check blade sharpness
Every 50 hours	Change engine oil, check air filter, grease fittings
Every 100 hours	Replace spark plug, check drive belt tension
Every season	Sharpen/replace blades, check battery charge

Oil Change: Run engine to warm oil, drain via drain plug, refill with SAE 30.

Storage & Winterization

Prepare mower for storage if not used for 30+ days.

Add fuel stabilizer to tank and run engine for 5 minutes.
Change engine oil and filter.
Remove spark plug, add 1 teaspoon oil, crank engine, reinstall plug.
Clean entire mower, especially underside of deck.
Store in dry, covered area; disconnect battery if storing long-term.

CAUTION! Never store with gasoline in tank without stabilizer. Gasoline can degrade and damage fuel system.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel, clogged filter	Charge battery, add fuel, replace fuel filter.
Poor cutting performance	Dull blades, low engine speed	Sharpen/replace blades, set throttle to FAST.
Vibration or noise	Loose blade, damaged spindle	Tighten blade bolts, inspect spindle bearings.
Loss of power	Dirty air filter, old spark plug	Clean/replace air filter, replace spark plug.
Hydrostatic transmission slips	Low oil, worn belt	Check transmission oil level, inspect drive belt.

Reset: For safety switches, ensure operator is seated and parking brake engaged.

Warranty Information

Husqvarna Limited Warranty: 2 years for residential use. Covers defects in materials/workmanship. Does not cover normal wear, misuse, or lack of maintenance. Keep receipt for proof of purchase. For warranty service, contact authorized Husqvarna dealer.

For support, visit www.husqvarna.com or contact 1-800-487-5962.