Husqvarna YTH 24V48 Owners Manual

The Husqvarna YTH 24V48 is a 24 HP V-Twin riding lawn tractor with a 48-inch cutting deck, hydrostatic transmission, electric PTO engagement, and a comfortable high-back seat. It features a durable steel frame, automotive-style steering, and a variety of attachments for year-round use. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Controls & Operation 4. Specifications 5. Maintenance Schedule 6. Attachments & Accessories 7. Storage & Winterization 8. Safety Information 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: 24 HP Briggs & Stratton V-Twin engine, 48-inch fabricated steel deck, Hydrostatic transmission, Electric PTO, High-back seat, Automotive steering, Headlights, Hour meter.

FeatureDescription
Engine24 HP Briggs & Stratton V-Twin, OHV
Cutting Deck48-inch fabricated steel, 3-blade
TransmissionHydrostatic, foot-pedal controlled
PTO EngagementElectric switch
SteeringAutomotive-style, responsive
SeatHigh-back, adjustable
Fuel Capacity3 gallons
Cutting Height1.5 to 4 inches, 6 positions
HeadlightsIntegrated for low-light operation
Hour MeterTracks engine hours for maintenance

Assembly & Setup

Unpack and inspect contents. Assembly requires basic tools.

  1. Install steering wheel: Align and tighten with provided hardware.
  2. Attach seat: Mount using bolts and washers.
  3. Connect battery: Attach red (+) then black (-) cables.
  4. Add engine oil: Use SAE 30 or 10W-30, check dipstick.
  5. Add fuel: Use fresh unleaded gasoline (87 octane minimum).
  6. Check tire pressure: Front 14 PSI, Rear 10 PSI.

WARNING! Tractor is heavy; use assistance during assembly. Ensure all hardware is tight.

Controls & Operation

Familiarize yourself with controls before starting.

  1. Starting: Sit on seat, set parking brake, move PTO to OFF, turn key to START.
  2. Driving: Release parking brake, press forward pedal to go forward, reverse pedal to go backward.
  3. Mowing: Engage PTO switch, adjust throttle to full, select cutting height lever.
  4. Stopping: Disengage PTO, set parking brake, turn key to OFF.

CAUTION! Always engage parking brake on slopes. Keep hands and feet away from moving parts.

Specifications

Maintenance Schedule

Regular maintenance ensures long life and optimal performance.

Before each use: Check engine oil, tire pressure, and fuel level.

Every 8 hours: Check mower deck for debris, inspect blades.

Every 50 hours: Change engine oil, replace oil filter.

Every 100 hours: Replace air filter, spark plug.

Seasonally: Grease fittings, sharpen blades, check battery.

Storage: Refer to Storage section for winterization steps.

Attachments & Accessories

Compatible with various Husqvarna attachments.

  1. Mulching Kit: Converts deck to mulch grass clippings.
  2. Bagging System: Collects clippings in rear bags.
  3. Snow Blower: 42-inch, two-stage for winter use.
  4. Front Bumper: Adds protection.
  5. Canopy: Provides shade.

Tip: Ensure tractor is off and key removed before installing attachments.

Storage & Winterization

Proper storage prevents fuel system issues and corrosion.

  1. Add fuel stabilizer to tank and run engine for 5 minutes.
  2. Change engine oil and filter.
  3. Clean mower deck thoroughly.
  4. Remove battery, store in cool, dry place, and charge monthly.
  5. Store in a dry, covered area.

WARNING! Never store tractor with fuel in tank without stabilizer. Keep away from open flames.

Safety Information

Read and understand all safety labels on the tractor.

Always wear eye protection, sturdy shoes, and long pants.

Keep bystanders, especially children and pets, away from the area.

Do not mow on slopes greater than 15 degrees.

Disengage PTO before crossing driveways or roads.

Never remove safety devices or guards.

Warranty Information

Husqvarna provides a 2-year limited warranty for residential use. Warranty covers defects in materials and workmanship. Proof of purchase is required. For warranty service, contact an authorized Husqvarna dealer. For support, visit www.husqvarna.com or contact 1-800-487-5962.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startParking brake not set, PTO engaged, dead batterySet parking brake, disengage PTO, charge or replace battery.
Poor cutting performanceDull blades, low engine speed, clogged deckSharpen blades, run at full throttle, clean deck.
Excessive vibrationUnbalanced blade, loose hardwareInspect and balance blade, tighten all bolts.
Hydrostatic transmission sluggishLow fluid, drive belt wornCheck fluid level, inspect and replace belt if needed.
Battery drains quicklyParasitic draw, old batteryCheck for accessories left on, test and replace battery.

Reset: Disconnect battery for 30 seconds to reset electrical system if needed.

Service: 1-800-487-5962; www.husqvarna.com

Husqvarna YTH 24V48 Owners Manual © - All Rights Reserved 2025