Husqvarna YTH22V46 Owner's Manual

The Husqvarna YTH22V46 is a 22 HP V-Twin Hydrostatic Riding Lawn Tractor with a 46-inch cutting deck, designed for residential lawn care. It features a Briggs & Stratton engine, hydrostatic transmission for smooth speed control, electric PTO engagement, cruise control, adjustable cutting height, ergonomic high-back seat, headlights, cup holder, and a durable steel frame. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Controls & Operation 4. Specifications 5. Maintenance Schedule 6. Cutting Deck Operation 7. Storage & Winterization 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: 22 HP Briggs & Stratton V-Twin engine, Hydrostatic transmission, 46-inch stamped steel cutting deck, Electric PTO clutch, Cruise control, Adjustable high-back seat, Headlights, Cup holder, Hour meter.

FeatureDescription
Engine22 HP Briggs & Stratton V-Twin, OHV
TransmissionHydrostatic, single pedal control
Cutting Width46 inches
Cutting Height1.5 to 4 inches, 6 positions
PTO EngagementElectric switch
Speed ControlForward/Reverse pedal, cruise control
SeatAdjustable high-back, padded
Fuel Capacity2.5 gallons
HeadlightsIntegrated for low-light operation
Deck Wash PortFor easy cleaning

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

  1. Install steering wheel: Align and secure with provided hardware.
  2. Attach seat: Mount to frame using bolts; adjust position.
  3. Connect battery: Attach red (+) then black (-) terminals.
  4. Install cutting deck: Lower deck lift, align with pins, secure with belt.
  5. Add fluids: Engine oil (check level), fuel (unleaded gasoline).

WARNING! Tractor is heavy; use assistance. Ensure all bolts are tightened to specification.

Controls & Operation

Familiarize yourself with controls before operation.

  1. Starting: Sit on seat, set parking brake, turn key to START.
  2. Driving: Release parking brake, press forward/reverse pedal gently.
  3. Mowing: Engage PTO switch only when deck is clear; adjust speed.
  4. Stopping: Disengage PTO, set parking brake, turn key to OFF.

CAUTION! Keep hands and feet away from moving parts. Do not mow on slopes greater than 15 degrees.

Specifications

Maintenance Schedule

Regular maintenance ensures longevity and performance.

IntervalTask
Before each useCheck engine oil, tire pressure, deck for debris
First 5 hoursChange engine oil (break-in)
Every 50 hoursChange engine oil, check air filter
Every 100 hoursReplace spark plug, check battery
SeasonallySharpen blades, lubricate fittings, check belts

Tip: Refer to engine manual for specific oil type and capacity.

Cutting Deck Operation

For optimal mowing results.

  1. Height adjustment: Use deck lift lever to select cutting height.
  2. Engagement: Start engine, engage PTO switch at low throttle.
  3. Mowing pattern: Overlap passes by 2-3 inches for even cut.
  4. Disengagement: Turn off PTO before stopping engine.
  5. Cleaning: Use deck wash port after mowing; disconnect spark plug wire first.

WARNING! Always shut off engine and remove key before servicing deck or blades.

Storage & Winterization

Prepare tractor for off-season storage.

  1. Fuel: Add fuel stabilizer or drain tank; run engine for 5 minutes.
  2. Oil: Change engine oil if due.
  3. Battery: Disconnect and store in cool, dry place; charge monthly.
  4. Deck: Clean thoroughly, apply light oil to prevent rust.
  5. Storage: Store in dry, covered area; cover tractor.

CAUTION! Gasoline is flammable; work in well-ventilated area.

Safety Information

Read and follow all safety instructions.

DANGER! Rotating blades can cause severe injury. Never place hands or feet under deck while engine is running.

Warranty & Support

Husqvarna provides a 2-year limited warranty for residential use. Warranty covers defects in materials and workmanship. For support, visit www.husqvarna.com or contact 1-800-487-5962. Keep your receipt and model/serial numbers for service.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startParking brake not set, seat occupied, dead batteryEnsure brake set, sit on seat, check battery connections, charge battery.
Poor cutting performanceDull blades, low engine speed, clogged deckSharpen blades, run at full throttle, clean deck.
Loss of powerDirty air filter, old fuel, clogged fuel filterReplace air filter, use fresh fuel, replace fuel filter.
Hydrostatic transmission sluggishLow fluid, air in systemCheck fluid level, purge air per manual.
Vibration or unusual noiseLoose blade, damaged spindle, debrisStop engine, inspect and tighten blade, check spindles.

Service: For repairs beyond basic maintenance, contact authorized Husqvarna service dealer.

Support: 1-800-487-5962; www.husqvarna.com

Husqvarna YTH22V46 Owner's Manual © - All Rights Reserved 2025