Installation Guide
Tools Needed:
- Adjustable wrench set
- Socket set
- Screwdrivers (flat and Phillips)
- Torque wrench
- Pliers
- Level
Step-by-Step Assembly
- Unpacking: Carefully remove all packaging materials and shipping supports from the lawn tractor.
- Steering Wheel Installation: Attach the steering wheel to the steering column using the provided hardware and torque to specification.
- Seat Installation: Mount the seat assembly to the seat plate using the provided bolts and washers.
- Battery Connection: Connect the battery cables (red to positive, black to negative) and secure the battery in its compartment.
- Deck Installation: Attach the mowing deck following the specific instructions for your model, ensuring proper belt routing.
- Wheel Installation: Mount all wheels and tighten lug nuts to specified torque values.
- Fluid Check: Check engine oil level, add if necessary. Fill fuel tank with fresh gasoline.
- Initial Start-up: Perform initial start-up following the engine manufacturer's break-in procedure.
Specifications
| Model Series | YTH24V48 / YTH26V54 |
| Type | Riding Lawn Tractor |
| Engine | Briggs & Stratton / Kohler V-Twin |
| Engine Power | 24 HP / 26 HP |
| Cutting Width | 48" / 54" |
| Cutting Height Range | 1.5" - 4.5" (12 positions) |
| Transmission | Hydrostatic / Automatic |
| Fuel Capacity | 3.5 gallons |
| Turning Radius | 18 inches |
| Dimensions (LxWxH) | 72 x 64 x 44 inches |
| Weight | 580 lbs |
| Tire Size (Front/Rear) | 15x6.00-6 / 20x10.00-10 |
Warranty Information
- Limited Warranty: 3 years residential use
- Engine Warranty: As per engine manufacturer (typically 2-3 years)
- Transmission Warranty: 3 years on hydrostatic transmission
- Additional Coverage: Extended warranty options available
For warranty service, contact Husqvarna Customer Service at 1-800-487-5962 or visit Husqvarna.com
Key Features
Hydrostatic Transmission
Smooth, effortless speed control with infinite forward and reverse speeds. No shifting required - simply use the pedal to control speed and direction.
Air Induction Mowing Technology
Creates a vacuum that lifts grass for a cleaner, more even cut. Reduces clumping and improves bagging performance.
Fabricated Mowing Deck
Heavy-duty 10-gauge steel construction with reinforced design for durability and optimal airflow for superior cutting performance.
Ergonomic Controls
All controls are within easy reach, including cruise control, deck lift lever, and PTO engagement for comfortable operation.
Comfortable High-Back Seat
Padded high-back seat with armrests and adjustable suspension for all-day comfort during extended mowing sessions.
Electric PTO Engagement
Engage and disengage the mowing deck with the flip of a switch - no manual lever required for convenient operation.
Cutting System Features
Dual Blade System
Two high-lift blades work together to create superior vacuum and discharge for excellent cut quality
Easy Change Deck
Quickly attach and detach the mowing deck without tools for easy maintenance and storage
Anti-Scalp Rollers
Prevent scalping on uneven terrain while allowing close cutting around obstacles
Deck Wash Port
Connect a garden hose to clean grass clippings from under the deck after each use
Gauge Wheels
Four adjustable gauge wheels help maintain consistent cutting height on uneven ground
Mulching Capability
Convertible deck allows for mulching, bagging, or side discharge with optional accessories
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | Dead battery, safety switches engaged, fuel issue | Check battery charge, ensure seat switch engaged, verify fuel supply |
| Poor cutting performance | Dull blades, incorrect cutting height, deck clogged | Sharpen/replace blades, adjust cutting height, clean deck |
| Loss of power | Clogged air filter, old fuel, dirty spark plug | Clean/replace air filter, use fresh fuel, clean/replace spark plug |
| Uneven cutting | Uneven tire pressure, deck not level, worn blades | Check tire pressure, level mowing deck, replace blades |
| Excessive vibration | Unbalanced blades, loose components, damaged spindle | Balance blades, tighten all bolts, inspect spindles |
| Hydrostatic transmission issues | Low fluid, air in system, linkage adjustment needed | Check fluid level, bleed system, adjust control linkage |
Common Error Indicators
- Oil Pressure Light: Low oil level or pressure - Stop engine immediately and check oil
- Battery Light: Charging system failure - Check alternator and battery connections
- Engine Overheating: Clean cooling fins and check oil level
- PTO Won't Engage: Check PTO switch, wiring, and clutch
- Hard Steering: Check power steering fluid and belt tension
- Brake Issues: Adjust brake linkage or replace brake pads
Manual Downloads
Current Model Manuals
YTH24V48
24HP 48" Cut Lawn Tractor
YTH26V54
26HP 54" Cut Lawn Tractor
YTH22V46
22HP 46" Cut Lawn Tractor
YTH18542
18.5HP 42" Cut Lawn Tractor
Popular Previous Models
YTH1542XP
15HP 42" Cut Lawn Tractor
YTH20K46
20HP 46" Cut Lawn Tractor
YTH21K46
21HP 46" Cut Lawn Tractor
YTH23V48
23HP 48" Cut Lawn Tractor